Proficiency Testing — Hot Air Oven(Interlaboratory Comparison — Thermal Mapping)
ISO/IEC 17043-aligned proficiency testing scheme for hot air oven (thermal mapping) calibration — circulated reference artefacts, ISO 13528 statistical evaluation (En / z-scores), and confidential performance reports for NABL-accredited and aspiring calibration laboratories.
What is the Proficiency Testing — Hot Air Oven Scheme?
Under ISO/IEC 17025:2017 (clause 7.7), every accredited calibration laboratory must monitor the validity of its results by participating in proficiency testing (PT) — and NABL expects documented, satisfactory PT participation across the accredited scope. Global Lab operates an ISO/IEC 17043:2023-aligned interlaboratory comparison scheme for hot air oven (thermal mapping) calibration: a characterised artefact travels between participating labs, each calibrates it by their normal method, and results are evaluated statistically against the assigned reference value.
Oven mapping is where temperature labs most often diverge — sensor placement, stabilisation judgment and uniformity computation all vary between labs until PT exposes it. The scheme measurand covers thermal mapping of a hot air oven — set-point error, uniformity and stability, with results reported at the protocol set-point(s) with defined sensor positions. Each participant receives a confidential performance report — En numbers and z-scores per ISO 13528 — through our Live PT Program portal, with anonymised group statistics and corrective-action guidance where performance flags arise.
How the Proficiency Testing — Hot Air Oven is Conducted
- 1
Enrolment
The laboratory enrols for the hot air oven (thermal mapping) scheme round through the Live PT Program portal and receives the scheme protocol. - 2
Artefact Receipt
The characterised artefact arrives per the circulation schedule with handling instructions and condition-check requirements. - 3
Calibration by Your Method
Your lab maps the designated oven (or circulated logger artefact, per protocol) using its normal multi-point mapping procedure and reports uniformity/stability results with uncertainties. - 4
Result Submission
Results with claimed uncertainties are submitted through the portal by the round deadline. - 5
Statistical Evaluation
Submissions are evaluated against the assigned value per ISO 13528 — En numbers and z-scores computed per measurement point. - 6
Performance Report
A confidential report with your performance flags and anonymised group statistics is issued; corrective-action guidance follows any unsatisfactory result.
Applicable Test Standards
| Standard | Title | Scope | Type |
|---|---|---|---|
| ISO/IEC 17043:2023 | Conformity Assessment — General Requirements for the Competence of Proficiency Testing Providers | PT Scheme Operation | International |
| ISO 13528:2022 | Statistical Methods for Use in Proficiency Testing by Interlaboratory Comparison | En / z-Score Evaluation | International |
| ISO/IEC 17025:2017 | Competence of Testing and Calibration Laboratories (Clause 7.7) | Participation Requirement | International |